Step 3: Turn On The Power And Press Scene 1 Button - Yamaha RX-V363 - AV Receiver Owner's Manual

Step 3: Turn on the power and
press SCENE 1 button
Check the type of the connected speakers.
If the speakers are 6 ohm speakers, set "SP IMP." to
"6ΩMIN" before using this unit (see page 12).
1
Turn on the video monitor and then set the
input source selector of the video monitor to
this unit.
2
Press ASTANDBY/ON on the front panel.
Press PSCENE 1.
3
"DVD Viewing" appears in the front panel display,
and this unit automatically optimize own status for
the DVD playback.
y
The indicator on the selected SCENE button lights up while
this unit is in the SCENE mode.
4
Start playback of the desired DVD on your
player.
5
Rotate HVOLUME to adjust the volume.
Note
When you change the input source or sound field program, the
SCENE mode is deactivated and the indicator on the SCENE
button turns off.
■ About SCENE function
Just by pressing one SCENE button, you can turn on this
unit and recall your favorite input source and sound field
program according to the SCENE template that has been
assigned to the SCENE button. The SCENE templates are
built combinations of input sources and sound field
programs.
y
If you connect a Yamaha product that has capability of the
SCENE control signals, this unit can automatically activate the
component and start playback. Refer to the instruction manual of
the DVD player for further information.
■ Using the other SCENE buttons
Default The name of the SCENE template
SCENE and its description
button
SCENE DVD Viewing
1
– input source: DVD
– sound field program: STRAIGHT
For when you want to listen to a music disc from
the connected DVD player as the background
music for this room.
SCENE Disc Listening
2
– input source: DVD
– sound field program: 5ch Stereo
For when you want to listen to a music disc from
the connected DVD player as the background
music for this room.
SCENE *1
TV Viewing
3
– input source: DTV/CBL
– sound field program: STRAIGHT
For when you want to watch a TV program.
SCENE
Radio Listening
4
– input source: TUNER
– sound field program: Music Enh. 5ch
For when you want to listen to a music program
from the FM radio station
Quick start guide
*2, *3, *4
7
En