Selecting The Scene Templates; Selecting The Desired Scene Template - Yamaha RX-V363 - AV Receiver Owner's Manual

SELECTING THE SCENE TEMPLATES

This unit is equipped with 13 preset SCENE templates for
various situations of using this unit. As the initial factory
setting, the following SCENE templates are assigned to
each SCENE button:
SCENE 1: DVD Viewing
SCENE 2: Disc Listening
SCENE 3: TV Viewing
SCENE 4: Radio Listening
If you want to use other SCENE templates, you can select
the desired SCENE templates from the SCENE template
library and assign the templates to the selected SCENE
buttons on the front panel and the remote control.
Select the desired SCENE template
SCENE template library
(Image)
Selecting the desired SCENE
template
Press and hold the desired P SCENE (or
1
5 SCENE) button for 3 seconds.
The indicator on the selected SCENE button on the
front panel starts to flash, and the name of currently
assigned SCENE template appears in the front panel
display.
3 seconds
1
Front panel
Flashes
D V D V i e w i n g
24
En
Selecting the SCENE templates
1
Assign the
SCENE template
to the SCENE
button
3 seconds
1
or
Remote control
1
Press N INPUT l / h (or press 4 AMP and
2
then 7 l / h) to select the desired template.
l
Front panel
AMP
Remote control
D V D M o v i e V i e w
Press the P SCENE (or 5 SCENE) button
3
again to confirm the selection.
The selected SCENE template is assigned to the
button.
1
Front panel
y
To cancel the procedure, press 4 AMP and then 8 RETURN.
Note
Once the desired SCENE templates are assigned to the
corresponding SCENE buttons, you may need to set the input
source of the SCENE template on the remote control. See page 28
for details.
h
INPUT
or
ENTER
1
or
Remote control