Pm Wake Up Events; Miscellaneous Control - JETWAY 939AGPR210 User Manual

3-8-1 Wake up Events
VGA
LPT & COM
HDD & FDD
PCI Master
Wake-Up on Ring
Wake-Up on PCI PME
PS2 KB Wake up Selection
Wake-Up on Hot Key (PS2 KB)
Wake-Up on USB Device
Wake-Up on RTC Alarm
Date of Month Alarm
Time (hh:mm:ss) Alarm
> IRQs Activities
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Wake Up On Ring/PME
During Disabled, the system will ignore any incoming call from the modem. During Enabled, the
system will boot up if there's an incoming call from the modem.
Wake-Up on RTC Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you cannot
use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.

3-9 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
Auto Detect PCI Clk
Spread Spectrum
Flash Port Write Protect
> IRQ Resources
PCI/VGA Palette Snoop
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Phoenix – AwardBIOS CMOS Setup Utility
Wake Up Events
OFF
LPT/COM
ON
OFF
Disabled
Disabled
Hot Key
Disabled
Disabled
Disabled
0
0 : 0 : 0
Press Enter
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
F6:Optimized Defaults
F7:Standard Defaults
Enabled
Disabled
Enabled
Press Enter
Disabled
F7:Standard Defaults
32
Item Help
Menu Level >>
F1:General Help
Item Help
Menu Level >
F1:General Help