Power User Overclock Settings - JETWAY 939AGPR210 User Manual

Bi-Turbo Technology Mode
Bi-Turbo Activated Threshold
Bi-Turbo Activated Time
Bi-Turbo CPU Clock Setting
CPU Thermal-Throttling
x CPU Thermal-Throttling Temp
x CPU Thermal-Throttling Duty
x CPU Thermal-Throttling Beep
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values

3-12 Power User Overclock Settings

Async AGP/PCI clock
*** Current Host Frequency is
CPU Clock at Next Boot is
*** Current DRAM Frequency is
DRAM Clock at Next Boot
CPU Ratio Select
CPU Vcore Select
CPU Vcore 7-Shift
Over Voltage
VRAM Output
VAGP Output
VCC2.5 Voltage Select
VCC1.2V Voltage
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
DRAM Clock at next Boot is
This item allows you change the CPU Host /DRAM clock for overclock demand. When the CPU
Host clock is over the CPU default value BIOS will auto disabled Bi-Turbo function.
CPU Vcore 7-Shift
This item allows you select the CPU Vcore Voltage 50mV more than the standard value by each
step , by this function for the precise over-clocking for extra demanding of performance.
VRAM Output
This item allows you to select 2.5V of the DDR Module. The choice are:2.55V/2.6V/2.65V/ 2.7V.
VAGP Output
This item allows you to select 1.5V of the AGP 4X/8X VGA card. The choice are: 1.5V, 1.6V,
1.7V, 1.8V.
VCC2.5 Voltage Select
This item allows you to select 2.5V of the VCC2.5V Voltage. The choice are: 2.55V, 2.6V, 2.65V,
2.7V.
Phoenix – AwardBIOS CMOS Setup Utility
BiTurbo Configurations
Disabled
60%(CPU Usage)
CPU Thermal-Throttling Duty
0.5s Later
12.50% ．．．．．[
202MHz
25.00% ．．．．．[
Disabled
37.50% ．．．．．[
85 C
50.00% ．．．．．[
50.00%
62.50% ．．．．．[
Enabled
75.00% ．．．．．[
87.50% ．．．．．[
:Move ENTER:Accept ESC:Abort
F6:Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Settings
F6:Optimized Defaults
]
]
]
]
]
]
]
F7:Standard Defaults
66.0/33.0 MHz
200MHZ ***
200MHz
200MHZ ***
200MHz(Auto)
Default
Not support AMD Sempron Processor
Default
Normal
Disabled
2.6V(Default)
1.5V(Default)
2.50V
1.2V
F7:Standard Defaults
36
Item Help
Menu Level >
F1:General Help
Item Help
Menu Level >
F1:General Help