Table of Contents
Advertisement
3. When license agreement appear, choose I
agree and click NEXT
5. Review install driver and utility component,
then click NEXT
Making SATA HDD driver diskette before Install WindowsXP/2000
If you only have Serial ATA HDDs on your system, before you install the Windows XP or
Windows 2000, you will need to make a SATA HDD driver diskette before you start to install
the Operating System.
How to make a SATA HDD driver diskette?
STEP 1: Insert the diskette which be formatted in floppy drive on a system which can start OS.
STEP 2: After booting OS insert the bundle CD in your CD-ROM
STEP 3: Copy all the files from \VIA\VIASATA\DriverDisk to floppy diskette
Once you have the SATA driver diskette ready, you may start to install Windows XP or
Windows 2000 on your System.
Installation of Windows XP/ Windows 2000
For installation of Windows XP or Windows 2000, please insert Windows XP or Windows
2000 CD into the CD-ROM drive. Then remove the floppy diskette, and boot the system. At
the very beginning, you will see the message at the bottom of screen, "Press F6 if you need to
install a third party SCSI or RAID driver...."
At this moment, please press <F6> key and follow the instructions of Windows XP or
Windows 2000 for the proper installation.
4. Select you want to install driver
6. Click FINISH and restart your computer
45
Advertisement
Table of Contents
