1. Click Program → Winbond Hardware
Doctor → Hardware Doctor the Winbond
Hardware Doctor will appears
You can remove the Utility in Control
Panel → Add/Remove Program icon
3. This is a CPU/System Fan Speed and
Temperature status information
4-5 MAGIC BIOS Install BIOS Live Update Utility
2. After executing Winbond Hardware Doctor
it supports system voltage, Fan speed and
CPU/SYSTEM Temperature. Because this
is a On-time Monitoring program therefore
the value will change after it detected, if
the value is over default setting the system
will have warning picture and beeps. This
is a System Voltage status
4. This is a CPU and System Memory status
information
44