Block mode is also called block transfer, multiple commands, or multiple sector read/write. If
your IDE hard drive supports block mode (most new drives do), select Enabled for automatic
detection of the optimal number of block read/writes per sector the drive can support. The
settings are: Enabled, Disabled.
3-7-2 Onboard Device Function
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
LAN Function
USB Controller
USB Keyboard Legacy Support
**Onboard AC97 Codec is ALC201/201A **
AC97 Audio
AC97 Modem
Game Port Address
Midi Port Address
x Midi Port IRQ
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
AC97 Audio
This item allows you to decide to enable/disable the chipset family to support AC97 Audio.
The settings are: Enabled, Disabled.
Game Port Address/Midi Port Address
This will determine which Address the Game Port/Midi Port will use.
AC97 Modem
This item allows you to decide to enable/disable the KT-266 chipset family to support AC97
Modem. The settings are: Auto, Disabled.
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB peripherals. The settings are: Enabled, Disabled.
USB Keyboard Legacy Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB keyboard. The settings are: Enabled, Disabled.
3-7-3 Onboard Super IO Function
Onboard Device Function
← Only for 845DBAL
Enabled
Enabled
Disabled
Auto
Auto
201
330
10
F6:Optimized Defaults
30
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults