Headers - JETWAY 845DBA3A User Manual

2-6-2 Headers

(1) Line-In/Out, MIC Header (9-pin): AUDIO
This header connect to Front Panel Line-In, Line-out, MIC connector with cable.
(2) USB Port Headers (9-pin) : USB1
These headers are used for connecting the additional USB port plug. By attaching an
option USB cable, your can be provided with two additional USB plugs affixed to the
back panel.
(3) IDE Activity LED: IDE LED
This connector connects to the hard disk activity indicator light on the case.
(4) Turbo LED switch: TURBO LED
Since the motherboard's turbo function is always on. The turbo LED will remain
constantly on while the system power is on. You may wish to connect the Power LED
from the system case to this lead. See the figure below.
(5) Reset switch lead: RESET
This 2-pin connector connects to the case-mounted reset switch for rebooting your
computer without having to turn off your power switch. This is a preferred method of
rebooting in order to prolong the lift of the system's power supply. See the figure
below.
Pin 1
AUDIO
L-IN-L L-IN-R
G ND
G ND
MIC MIC P
G ND
L-O UT-L L-O UT-R
Line-In/Out, MIC Headers
USB1
Pin 1
USB Port Headers
17