Pnp/Pci Configuration Setup - JETWAY 830CF User Manual

CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
IRQ [3-7,9-15],NMI
IRQ 8 Break Suspend
RING Power Up Control
MACPME Power UP Control
PCIPME Power Up Control
KB Power ON Password
Power Up by Alarm
x Month Alarm
x Day of Month Alarm
x Time (hh:mm:ss) Alarm
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Ring Power Up Control
During Disabled, the system will ignore any incoming call from the modem. During Enabled,
the system will boot up if there's an incoming call from the modem.
PCIPME Power Up Control
This will enable the system to wake up by PCI device Power Management function.
The settings are: Enabled and Disabled.
KB Power ON Password
This item can setting Power On Password, if you Enabled keyboard Power On function then
you can Power On system by key-in the password which you setting.
Power Up by Alarm
This function is for setting date and time for your computer to boot up. During Disabled, you
cannot use this function. During Enabled, choose the Date and Time Alarm:
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.

3-9 PnP/PCI Configuration Setup

PM Wake Up Events
Enabled
Disabled
Disabled
Disabled
Disabled
Enter
Disabled
NA
NA
0 : 0 : 0
F6:Optimized Defaults F7:Standard Defaults
37
Item Help
Menu Level >>
F1:General Help