Table of Contents
Advertisement
Power Connector: ATX _ PW (20-pin block)
(1)
ATX Power Supply connector. This is a new defined 20-pins connector that
usually comes with ATX case. The ATX Power Supply allows to use soft power
on momentary switch that connect from the front panel switch to 2-pins Power
On jumper pole on the motherboard. When the power switch on the back of the
ATX power supply turned on, the full power will not come into the system board
until the front panel switch is momentarily pressed. Press this switch again will
turn off the power to the system board.
(2)
PS/2 Mouse & PS/2 Keyboard Connector: KBMS
The connectors for PS/2 keyboard and PS/2 Mouse.
(3)
USB Port connector: USB
The connectors are 4-pins connector that connect USB devices to the system board.
(4)
LAN Port connector: LAN (Only for 830CF)
This connector is standard RJ45 connector for Network connector.
Pin 1
PIN
ROW2
1
3.3V
2
-12V
3
GND
4
Soft Power On
5
GND
6
GND
7
GND
8
-5V
9
+5V
10
+5V
PS/2 Mouse
PS/2 Keyboard
USB PORT 1
USB PORT 2
16
ROW1
3.3V
3.3V
GND
5V
GND
5V
GND
Power OK
+5V (for Soft Logic)
+12V
Hide quick links:
Advertisement
Table of Contents
