3-8-2.1 Irqs Activity Monitoring; Pnp/Pci Configuration Setup - JETWAY 603TCR4A User Manual

3-8-2.1 IRQs Activity Monitoring

CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
Primary INTR
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values

3-9 PnP/PCI Configuration Setup

This section describes configuring the PCI bus system. PCI, or Personal Computer
Interconnect, is a system which allows I/O devices to operate at speeds nearing the
speed the CPU itself uses when communicating with its own special components. This
section covers some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
CMOS Setup Utility – Copyright(C) 1984-2002 Award Software
PNP OS Installed
Reset Configuration Data
Resources Controlled By
x IRQ Resources
x DMA Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
↑↓→← :Move Enter:Select
F5:Previous Values
IRQs Activity Monitoring
[ON]
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Enabled
Disabled
F6:Optimized Defaults F7:Standard Defaults
PnP/PCI Configurations
[No]
Disabled
Auto(ESCD)
Press Enter
Press Enter
Disabled
Enabled
Enabled
+/-/PU/PD:Value F10:Save
F6:Optimized Defaults
31
Item Help
Menu Level >>>
F1:General Help
Item Help
Menu Level >
Default is Disabled.
Select Enabled to
reset Extended System
Configuration Data
ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
ESC:Exit F1:General Help
F7:Standard Defaults