Headers - JETWAY 603TCR4A User Manual

(11) Secondary IDE Connector (40-pin block): IDE2
This connector connects to the next set of Master and Slave hard disks. Follow the
same procedure described for the primary IDE connector. You may also configure two
hard disks to be both Masters using one ribbon cable on the primary IDE connector and
another ribbon cable on the secondary IDE connector.
•
Two hard disks can be connected to each connector. The first HDD is referred to as the
"Master" and the second HDD is referred to as the "Slave".
•
For performance issues, we strongly suggest you don't install a CD-ROM or DVD-ROM
drive on the same IDE channel as a hard disk. Otherwise, the system performance on this
channel may drop.

2-6-2 Headers

(1) Internal Keyboard Headers (4-pin header) : JKB
IDE1 IDE2
Pin 1
Primary IDE Connector
IDE1 IDE2
Pin 1
Secondary IDE Connector
JKB
Pin 1
Internal Keyboard Headers
16
Pin 1
Pin 1