Load Standard/Optimized Defaults; Set Supervisor/User Password - JETWAY 601CFR4A User Manual

CyrixIII Clock Ratio
Auto Detect DIMM/PCI Clock
Spread Spectrum
** Current Host Clock is 66MHz **
Host Clock at Next Boot is [66MHz/33MHz]
** Current DRAM Clock is 66Mhz **
DRAM Clock at Next Boot is [66]MHz
¡ ü ¡ ý ¡ ú ¡ û :Move Enter:Select
F5:Previous Values
Auto Detect DIMM/PCI Clock
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock Spread Spectrum.
The choice are: Disabled and Enabled.
Host Clock at Next Boot is
This item allows you to step by step setting CPU/HOST Frequency, USE PageDown/ PageUp
key user can change the frequency to approach overclocking.
DRAM Clock at Next Boot is
This item allows you to select SDRAM Frequency to add or to decrease.

3-12 Load Standard/Optimized Defaults

Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a message similar
to:
Load Standard Defaults (Y/N)? N
Pressing <Y> loads the BIOS default values for the most stable, minimal-performance system
operations.
Load Optimized Defaults
When you press <Enter> on this item, you get a confirmation dialog box with a message
similar to:
Load Optimized Defaults (Y/N)? N
Pressing <Y> loads the default values that are factory settings for optimal performance system
operations.

3-13 Set Supervisor/User Password

You can set either supervisor or user password, or both of them. The differences are:
Supervisor password: Can enter and change the options of the setup menus.
User password:
Default
Enabled
Disabled
+/-/PU/PD:Value
F6:Optimized Defaults
Can only enter but do not have the right to change the options
32
Menu Level >
F10:Save ESC:Exit
F7:Standard Defaults
Item Help
F1:General Help