Pc Health Status; Miscellaneous Control - JETWAY 601CFR4A User Manual

into each of the sub menu that follows this field (a sub menu is preceded by a ">").
The settings are: Auto (ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the interrupt.
PCI/VGA Palette Snoop
Leave this field at Disabled. The settings are Enabled, Disabled.

3-10 PC Health Status

This section shows the Status of you CPU, Fan, Warning for overall system status.
This is only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
Show PC Health in Post
Vcore
2.5V
3.3V
5V
12V
Current CPU Temp.
Current System Temp.
Current FAN1 Speed
Current CPUFAN2 Speed
:Move Enter:Select
¡ ü ¡ ý ¡ ú ¡ û
F5:Previous Values
Show PC Health in Post
During Enabled, it displays information list below. The choice is either Enabled or
Disabled
Current CPU Temperature/Current System Temp/Current FAN1,FAN2 Speed/
Vcore/Vtt/Vcc3.3/+5V/+12V/-12V/-5V (V)
This will show the CPU/FAN/System voltage chart and FAN Speed.

3-11 Miscellaneous Control

This section is for setting CPU Frequency Control.
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
PC Health Status
[Enabled]
1.91V
2.50V
3.40V
5.10V
11.95V
33 ° C/91 ° F
21 ° C/69 ° F
5100 RPM
0
+/-/PU/PD:Value F10:Save
F6:Optimized Defaults
Miscellaneous Control
31
Item Help
Menu Level >
ESC:Exit F1:General Help
F7:Standard Defaults