Radio Shack 63-1110 - Wireless Mail Guard Owner's Manual page 14

Wireless mail guard
Table of Contents

Advertisement

63-1110.fm Page 14 Friday, September 22, 2000 3:33 PM
ˆ
Operation
1. Follow the steps in "Mounting the Transmitter" on
Page 9 and "Connecting AC Power" on Page 12,
then close the mailbox door.
2. Slide
on the base to the same setting used
A B C
for the transmitter.
3. Fully extend and rotate the antenna on the base
(receiver) for the best reception.
4. When the mailbox is opened, the base beeps for
about 10 seconds and the green MAIL indicator
flashes. Press
RESET
red POWER indicator on the base lights steadily.
CARE
Keep the Mail Guard system dry; if it gets wet, wipe it
dry immediately. Use and store the system only in
normal temperature environments. Handle the sys-
tem carefully; do not drop it. Keep the system away
from dust and dirt, and wipe it with a damp cloth occa-
sionally to keep it looking new.
Modifying or tampering with the Mail Guard system's
internal components can cause a malfunction and
14
Operation
to return to standby. The

Advertisement

Table of Contents
loading

Table of Contents