Mounting The Base - Radio Shack 63-1110 - Wireless Mail Guard Owner's Manual

63-1110.fm Page 11 Friday, September 22, 2000 3:33 PM
3. Remove the backing from the other side of the
double-sided tape and press the transmitter's
mounting bracket on the corner of the mounting
surface, angled to about 45° and facing out.
4. Snap the transmitter into its mounting bracket.

MOUNTING THE BASE

You can mount the base on a wall or set it flat (on its
base) on a flat surface, such as a counter or table.
Telescoping Antenna — extend
fully for the best reception.
DC 12V Jack — power
the base (receiver) using
standard AC power.
A B C Channel Switch
select one of three chan-
nels to help eliminate in-
terference from nearby
sources.
POWER/MAIL Indicator — lights steadily red
when in standby or flashes green when the mail-
box has been opened.
Installation
RESET — press to
set the base to
standby.
11