Radio Shack 63-1110 - Wireless Mail Guard Owner's Manual page 13

63-1110.fm Page 13 Friday, September 22, 2000 3:33 PM
Cautions:
You must use a Class 2 power source
!
that supplies 12V DC and delivers at
least 200 mA. Its center tip must be set
to positive and its plug must fit the base's
jack. The supplied adapter meets these specifi-
cations. Using an adapter that does not meet
these specifications could damage the base or
the adapter.
• Always connect the AC adapter to the base
before you connect it to AC power. When you fin-
ish, disconnect the adapter from AC power
before you disconnect it from the base.
Follow these steps to connect the base to AC power.
1. Insert the AC adapter's barrel plug into the
base's jack.
DC 12V
2. Plug the other end of the adapter into a standard
AC outlet. The red POWER indicator on the base
lights.
Installation
DC 12V
13