Table of Contents
Advertisement
Chapter 2
Configuring the Bridge for the First Time
Obtaining and Installing IPSU
IPSU is available on the Cisco web site. Follow these steps to obtain and install IPSU:
Use your Internet browser to access the Cisco Software Center at the following URL:
Step 1
http://www.cisco.com/cisco/software/navigator.html
Click Cisco Aironet Wireless LAN Client Adapters.
Step 2
Scroll down to the Windows Utility section.
Step 3
Step 4
Click Cisco Aironet Client Utility (ACU) for Windows.
Step 5
Click the file IPSUvxxxxxx.exe. The vxxxxxx identifies the software package version number.
Step 6
Read and accept the terms and conditions of the Software License Agreement.
Download and save the file to a temporary directory on your hard drive and then exit the Internet browser.
Step 7
Double-click IPSUvxxxxxx.exe in the temporary directory to expand the file.
Step 8
Double-click Setup.exe and follow the steps provided by the installation wizard to install IPSU.
Step 9
The IPSU icon appears on your computer desktop.
Using IPSU to Find the Bridge's IP Address
If your bridge receives an IP address from a DHCP server, you can use IPSU to find its IP address.
Because IPSU sends a reverse-ARP request based on the bridge MAC address, you must run IPSU from
a computer on the same subnet as the bridge. Follow these steps to find the bridge's IP address:
Double-click the IPSU icon on your computer desktop to start the utility. The IPSU screen appears (see
Step 1
Figure
Figure 2-3
When the utility window opens, make sure the Get IP addr radio button in the Function box is selected.
Step 2
OL-4059-01
2-3).
IPSU Get IP Address Screen
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
Using the IP Setup Utility
2-9
Advertisement
Table of Contents
