Displaying The Radius Configuration; Controlling Bridge Access With Tacacs - Cisco CISCO1401 - 1401 Router - EN Software Manual

Controlling Bridge Access with TACACS+

Beginning in privileged EXEC mode, follow these steps to specify RADIUS authorization for privileged
EXEC access and network services:
Command
Step 1 configure terminal
Step 2
aaa authorization network radius
Step 3
aaa authorization exec radius
Step 4
end
Step 5
show running-config
Step 6 copy running-config startup-config
To disable authorization, use the no aaa authorization {network | exec} method1 global configuration
command.

Displaying the RADIUS Configuration

To display the RADIUS configuration, use the show running-config privileged EXEC command.
Controlling Bridge Access with TACACS+
This section describes how to control administrator access to the bridge using Terminal Access
Controller Access Control System Plus (TACACS+). For complete instructions on configuring the
bridge to support TACACS+, see
TACACS+ provides detailed accounting information and flexible administrative control over
authentication and authorization processes. TACACS+ is facilitated through AAA and can be enabled
only through AAA commands.
For complete syntax and usage information for the commands used in this section, refer to the Cisco IOS
Note
Security Command Reference for Release 12.2.
These sections describe TACACS+ configuration:
•
•
•
•
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
5-12
Purpose
Enter global configuration mode.
Configure the bridge for user RADIUS authorization for all
network-related service requests.
Configure the bridge for user RADIUS authorization to determine if the
user has privileged EXEC access.
The exec keyword might return user profile information (such as
autocommand information).
Return to privileged EXEC mode.
Verify your entries.
(Optional) Save your entries in the configuration file.
Default TACACS+ Configuration, page 5-13
Configuring TACACS+ Login Authentication, page 5-13
Configuring TACACS+ Authorization for Privileged EXEC Access and Network Services, page
5-14
Displaying the TACACS+ Configuration, page 5-15
Chapter 11, "Configuring RADIUS and TACACS+ Servers."
Chapter 5 Administering the Bridge
OL-4059-01