Provisioning Your Ata Device; Provisioning Capabilities - Cisco SPA2102-AN - Single Port Router Administration Manual

Analog telephone adapters
Table of Contents

Advertisement

Basic Administration and Configuration

Provisioning Your ATA Device

Provisioning Your ATA Device
Cisco Small Business ATA Administration Guide
This section describes the provisioning functionality of the ATA device. This
section includes the following topics:
"Provisioning Capabilities" section on page 45
"Configuration Profile" section on page 46
For detailed information about provisioning your ATA device, refer to the SPA
Provisioning Guide.

Provisioning Capabilities

The ATA device provides for secure provisioning and remote upgrade.
Provisioning is achieved through configuration profiles transferred to the device
via TFTP, HTTP, or HTTPS. To configure Provisioning, go to Provisioning tab in the
administration web server.
The ATA device can be configured to automatically resync its internal
configuration state to a remote profile periodically and on power up. The
automatic resyncs are controlled by configuring the desired profile URL into the
device.
The ATA device accepts profiles in XML format, or alternatively in a proprietary
binary format, which is generated by a profile compiler tool available from Cisco.
Find the Profiler Compiler for your ATA at
sell/smb/products/voice_and_conferencing.html#~vc_technical_resources.
The ATA device supports up to 256-bit symmetric key encryption of profiles. For
the initial transfer of the profile encryption key (initial provisioning stage), the ATA
device can receive a profile from an encrypted channel (HTTPS), or it can resync
to a binary profile generated by the Cisco-supplied profile compiler. In the latter
case, the profile compiler can encrypt the profile specifically for the target ATA
device, without requiring an explicit key exchange.
Remote firmware upgrade is achieved via TFTP or HTTP (firmware upgrades
using HTTPS are not supported). Remote upgrades are controlled by configuring
the desired firmware image URL into the ATA device via a remote profile resync.
For further information about remote provisioning refer to the SPA Provisioning
Guide.
http://www.cisco.com/web/partners/
2
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spa2102Spa3102Spa8000Spa8800Pap2t

Table of Contents