Basic Administration and Configuration
Basic Services and Equipment Required
Cisco Small Business ATA Administration Guide
This chapter describes the equipment and services that are required to install
your ATA device and explains how to complete the basic administration and
configuration tasks.
Refer to the following topics:
•
"Basic Services and Equipment Required" section on page 36
•
"Downloading Firmware" section on page 37
•
"Basic Installation and Configuration" section on page 37
•
"Upgrading the Firmware for the ATA Device" section on page 37
•
"Setting up Your ATA Device" section on page 38
•
"Using the Administration Web Server" section on page 39
•
"Upgrading, Rebooting, and Resyncing Your ATA Device" section on
page 43
•
"Provisioning Your ATA Device" section on page 45
To configure your ATA devices, you need the following services and equipment:
•
An integrated access device or modem for broadband access to the Internet
•
Internet Telephony Service Provider (ITSP) for Voice Over IP Telephone service
•
You must have to following information about your account:
•
SIP Proxy (IP address or name)
•
Account information and Password
2
36