Line Enable Section - Cisco SPA2102-AN - Single Port Router Administration Manual

ATA Voice Field Reference
Line page
Cisco Small Business ATA Administration Guide
•
"Gateway Accounts section (SPA3102)" section on page 180
•
"Dial Plan section" section on page 181
•
"FXS Port Polarity Configuration section" section on page 183
•
"VoIP-to-PSTN Gateway Setup section (SPA8800)," on page 183
•
"PSTN-To-VoIP Gateway Setup section (SPA8800)," on page 184
•
"Call Forward, Speed Dial, Supplementary Services, and Ring Settings
(SPA8000 and SPA8800)," on page 190
In a configuration profile, the Line parameters must be appended with the
appropriate numeral (for example, [1] or [2]) to identify the line to which the setting
applies. The number of lines varies with the model of the ATA device. For example,
the SPA2102 provides two Line tabs (Line 1 and Line 2), while the SPA8000
provides eight tabs (Line1 through Line 8).
Voice tab > Line page >

Line Enable section

Line Enable
Trunk Enable
To enable this line for service, select yes. Otherwise, select
no.
The default is yes.
To add this line to a trunk group, choose the trunk group
number. Otherwise, choose none. This feature is available
on the SPA8000 only.
The default is none.
B
161