Cisco Ata 191 Hardware; Ata 191 Top Panel - Cisco ATA 191 Quick Start Manual

Cisco ATA 191 Hardware

Cisco ATA 191 Hardware
The ATA 191 and ATA 192 are compact, easy to install devices.
The unit provides these connectors:
• 5V DC power connector.
• Two RJ-11 FXS (Foreign Exchange Station) ports—Your ATA has two RJ-11 ports that work with any
• One WAN network port—An RJ-45 10/100BASE-T data port to connect an Ethernet-capable device to
Note The ATA network port performs autonegotiation for duplex and speed. It supports speeds of 10/100 Mbps
and full-duplex.

ATA 191 Top Panel

The top panel of your ATA has several LEDs that are used to show the device's status.
Figure 3: ATA 191 Top Panel
The following table describes the LEDs located on your ATA.
Cisco ATA 191 Analog Telephone Adapter Overview
4
standard analog phone device. Each port supports either voice calls or fax sessions, and both ports can
be used simultaneously.
the network.
Cisco ATA 191 Analog Telephone Adapter Overview