Power Management Setup - TYAN TOMCAT K8E Manual

Onboard Parallel Port
To use the parallel port on the system, select an address and corresponding
interrupt for the parallel port.
378/IRQ7 / 278/IRQ5 / 3BC/IRQ7 / Disabled
Parallel Port Mode
This field allows the user to select the parallel port mode. The default value is
Standard that automatically selects the correct mode to use.
Standard / SPP / EPP1.7 / EPP 1.9 / ECP / ECP+EPP
ECP Mode Use DMA
This BIOS feature determines which DMA channel the parallel port should use
when it is in ECP mode.
3 / 1

3.10 Power Management Setup

This menu has options for the Power management. Use the up and down
<Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change
the value of the selected option.
ACPI function
ACPI Suspend Type
Power Management
Video Off Method
HDD Power Down
HDD Down in Suspend
Soft-Offf by PBTN
Intruder# Detection
PowerOn After Pwr-Fail
WOL (PME#) From Soft-Off
WOR (RI#) From Soft-Off
Power-On by Alarm
x Day of Month Alarm
x Time (hh:mm:ss) Alarm
AMD Cool'n'Quiet/Power Now
POWER ON Function
¡ ô ¡ õ ¡ ö ¡ ÷ : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit
F1: General Help F5: Previous Values F6: Fail-Safe Defaults
F7: Optimized defaults
Phoenix-AwardBIOS CMOS Setup Utility
Power Management Setup
[Enabled]
[S1&S3]
[User Define]
[DPMS Support]
[Disabled]
[Disabled]
[instant-off]
[Disabled]
[Off]
[Disabled]
[Disabled]
[Disabled]
0
[Disabled]
[BUTTON ONLY]
http://www.tyan.com
0
: 0 : 0
55
Item Specific Help