Setting Up The Bios; Chapter 5: Setting Up Raid Configuration - TYAN TOMCAT K8E Manual

Chapter 5: Setting up RAID Configuration

The Tomcat K8E S2865 provides support for NVIDIA RAID 0, 1, and 0+1. The
RAID (Redundant Array of Independent Disks) technology uses multiple drives
to either increase total disk space or to offer data protection.
The RAID techniques were first published in 1988 by a multivendor
consortium – the RAID Advisory Board. RAID techniques were divided into
different categories or levels. Originally, RAID levels focused on improving
resiliency or data availability. As additional RAID levels were defined, one was
introduced for improving performance. For all levels, RAID techniques optimize
storage solutions by using multiple disks grouped together and treated them as
a single storage resource.
This chapter describes the basic steps for configuring NVIDIA RAID.

5.1 Setting up the BIOS

1. Start your computer, then press Delete to enter the BIOS setup. The BIOS
CMOS Setup Utility screen appears.
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PCI Health Status
¡ ô ¡ õ ¡ ö ¡ ÷ : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit
F1: General Help F5: Previous Values F6: Fail-Safe Defaults
F7: Optimized defaults
Phoenix-AwardBIOS CMOS Setup Utility
http://www.tyan.com
Frequency/Voltage Control
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit without Saving
71