Power Management Setup - TYAN S1570 AT User Manual

4.7.1 Power Management Setup

POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC
Power Management
PM Control By APM
Video Off Method
Video Off After
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
Throttle Duty Cycle
ZZ Active Monitor
IRQ8 Clock Event
w w Power Management
Options are disabled, user defined, Min saving, and Max saving.
w w PM Control by APM
Options are "Yes" and "No". When set for "No", system BIOS will
ignore APM when power managing the system. If set on "Yes" the
system BIOS will wait for APM's prompt before it enters any PM
mode, e.g. Doze, Standby or Suspend.
w w Video Off Method
The "Blank Screen" option will let the system BIOS blanks the screen
when disabling video. V/H SYNC+Blank will let the BIOS turn off the
V-SYNC and H-SYNC signals from the VGA card to the monitor.
S1570-001-01 http://www.tyan.com
ROM ISA BIOS
:Disabled Reload Global Timer Events
:No IRQ (3-7, 9-15), NMI
:Blank Screen Primary IDE 0
:N/A Primary IDE 1
:Disabled Secondary IDE 0
:Disabled Secondary IDE 1
:Disabled Floppy Disk
:Disabled Serial Port
:62.5% Parallel Port
:Disable
:Disable
31
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable