Connecting The Av Receiver; Connecting Your Speakers - Onkyo NR3007 - TX AV Network Receiver Instruction Manual

Connecting the AV receiver

Connecting Your Speakers

About Speakers A and Speakers B
Speakers A and Speakers B allows you to have two speaker configurations of up to 7.2 speakers. Each configuration has
its own pair of stereo front speakers and can use the same subwoofer, center, surround, and surround back speakers, as
required. You could, for example, use Speakers A when watching a DVD movie with 7.2-channels surround sound and
use Speakers B for serious music listening with a pair of stereo speakers (2-channels).
The speakers are configured by using the "Speaker Settings" on page 57 and "Speaker Setup" on page 95.
Front Speakers A and front Speakers B can be wired normally, bi-amped, or bridged, but A and B cannot be bi-amped
or bridged at the same time. For example, if front Speakers A are bridged, front Speakers B can only be wired normally.
Similarly, if front Speakers B are bi-amped, Speakers A can only be wired normally. When bridging or bi-amping is
used, the AV receiver can drive up to 5.2 speakers in the main room. See pages 22 to 26 for more information.
The Speakers A and Speakers B configurations are selected by using the [SP LAYOUT] button on the remote controller.
Only one configuration can be selected at a time.
The versatility offered by the Speakers A and Speakers B configurations means you can configure the AV receiver to
suit your exact requirements and application. Two typical applications are shown below.
■ 7.2-channel Playback with Speakers A and
Stereo Playback with Speakers B
In this example, Speakers A provides 7.2-channel
surround sound for enjoying DVD movies, while
Speakers B is used for serious music listening with a
pair of top-quality stereo speakers.
FL
SL
2–1. Speaker Settings
Speaker Impedance
Speakers Type(FrontA)
Speakers Type(FrontB)
Powered Zone2
Powered Zone3
2–2. Speaker Configuration
Subwoofer
Front
Center
Surround
Surr Back
2–2. Speaker Configuration
Subwoofer
Front
Center
Surround
Surr Back
18
Speakers B
FR
FL C FR
Speakers A
SR
SBL SBR
6ohms
Normal
Normal
Not Act
Not Act
Use
Speaker A
Use
Use
Use
Use
Not Use
Speaker B
Use
Not Use
Not Use
Not Use
■ 5.2-channel Playback with Bridged Front
Speakers
In this example, Speakers A provides 5.2-channel
surround sound for enjoying DVD movies, while
Speakers B is bridged for use with a pair of high-
power stereo speakers, the subwoofer is used with
Speakers A and Speakers B.
Speakers B
FL
FL
Subwoofer
Speakers A
used with A
and B
SL
2–1. Speaker Settings
Speaker Impedance
Speakers Type(FrontA)
Speakers Type(FrontB)
Powered Zone2
Powered Zone3
2–2. Speaker Configuration
Subwoofer
Front
Center
Surround
Surr Back
2–2. Speaker Configuration
Subwoofer
Front
Center
Surround
Surr Back
FR
C FR
SR
8ohms
Normal
BTL
Not Act
Not Act
Use
Speaker A
Use
Use
Use
Not Use
Use
Speaker B
Use
Not Use
Not Use
Not Use