Pnp/Pci Configuration; Pc Health Status - TYAN TIGER 200T User Manual

3.7 PnP/PCI Configuration

This section describes the PCI/PnP configuration options available.
PNP OS Installed
Reset Configuration Data
Resources Controlled By
(ESCD)
IRQ Resources
DMA Resources
PCI/VGA Palette Snoop
Assign IRQ for VGA
Assign IRQ for USB

3.8 PC Health Status*

This section describes the hardware monitoring of certain onboard devices. No options are user-defined.
Current CPU1 Temp.
Current CPU2 Temp.
Current CPUFAN1 Speed
Current CPUFAN2 Speed
CPU1 Vcore
CPU2 Vcore
3.3V
5V
12V
Tiger 200T S2505T
Sets whether the system is using a Plug-n-Play OS. [Default set-
ting is NO]
Sets whether the configuration data in the ESCD should be
reset at bootup. [Default setting is Disabled]
Sets how the PnP devices will be controlled. [Default is
Auto(ESCD)]
Sets IRQs PnP control statuses.
Sets DMAs PnP control statuses.
Reserved. [Default setting is Disabled]
Sets whether an IRQ should be reserved for VGA. [Default set-
ting is Enabled]
Sets whether an IRQ should be reserved for USB. [Default set-
ting is Enabled]
Displays temperature of CPU1 in Celsisus and Farenheit.
Displays temperature of CPU2 in Celsisus and Farenheit.
Displays speed of CPUFAN1 in revolutions per minute (RPM).
Displays speed of CPUFAN2 in revolutions per minute (RPM).
Displays core voltage of CPU1.
Displays core voltage of CPU2.
Displays power supply voltage on 3.3V line.
Displays power supply voltage on 5V line.
Displays power supply voltage on 12V line.
41