G Serial Port Connector; Husb Connector - TYAN TIGER 200T User Manual

2.6-G. Serial Port Connector ("COM1" or Serial Port B)*
This header can be used to connect an (optional) serial port. More details available on the Tyan website:
http://www.tyan.com
2.6-H. USB Connector (USB2)**
This header can be used to connect the (optional) USB cable. Pinouts for USB2 are shown below.
* extra accessories can be purchased at the Tyan Online Store: http://www.etyan.com
** if your chassis supports frontside USB cables, it will usually come with those cables. Check with your
chassis vendor for details. Tyan does not provide frontside USB cables.
14
Serial Port B Header
DCD 1 2 RX
TX 3 4 DTR
GND 5 6 DSR
RTS 7 8 CTS
RI 9 10 NC/KEY
USB Connector (USB2)
VCC 1 2 VCC
DT3 - 3 4 DT4 -
DT3 + 5 6 DT4 +
GND 7 8 GND
GND 9 10 GND
http://www.tyan.com