Power Management Setup - TYAN TIGER 200T User Manual

3.6 Power Management Setup

This section describes the different power management functions that may be available on your system.
Please note that power management functions are also dependent on your OS' power management func-
tions, and that both OS and system power management functions should be set up to work in conjunction
with one another.
ACPI Function
Power Management (subscreen)
Power Management
HDD Power Down
Doze Mode
Suspend Mode
ACPI Suspend Type
PM Control by APM
Video Off Option
Video Off Method
Modem Use IRQ
Soft-Off by PWRBTN
State after power failure
CPU Fan in Syspend
Wake Up Events (subscreen)
(continued on next page)
Tiger 200T S2505T
Enable or Disable Advanced Configuration Power Interface.
[Default setting is Enabled]
Lets you enter the screen for configuring power states.
Sets whether each mode should be set separately. [Default is
User Define]
Sets time that system should wait before powering down the
HDD(s). [Default is Disable]
Sets time that system should wait before CPU clock runs at
slower speed to save power. [Default is Disabled]
Sets time that system should wait before suspending all devices
except for CPU, to save power. [Default is Disabled]
Sets type of suspend function to enable once the system enters
suspend mode. [Default is S1(POS)]
Reserved. [Default is Yes]
Sets power-saving mode for video display. [Default is Suspend-
>Off]
Determines manner in which the monitor is blanked. [Default is
V/H SYNC+Blank]
If Modem Ring Resume is Enabled, it's possible to wake the
system up by dialing into it. [Default is 3]
Sets time needed to hold down the power button to shutdown
the system. [Default setting is Instant-Off]
Sets system state after a power failure occurs. [Default is Auto]
Sets state of the CPU Fan when Suspend mode occurs. [Default
is Off]
Lets you enter the screen for configuring wake up events.
39