Pnp / Pci Configuration - TYAN TRINITY KT-A Manual

PnP / PCI Configuration

Note: This chapter describes all fields offered by Award Software in this screen. Your
system board designer may omit or modify some fields.
PnP / PCI Configurations - Fail-Safe and Optimized Default Settings
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
PNP OS Installed
Reset Configuration Data
Resources Controlled By
X IRQ Resources
X DMA Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
:Move Enter:Select
F5:Previous Values
PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play aware (e.g., Windows
98).
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended System
Configuration Data (ESCD) when you exit Setup if you have installed a new add-on
and the system reconfiguration has caused such a serious conflict that the operating
system cannot boot.
Resources Controlled By
The Plug and Play EliteBIOS can automatically configure all the boot and Plug and
Play-compatible devices. If you select Auto, all the interrupt request (IRQ) and DMA
assignment fields disappear, because the BIOS automatically assigns them.
S2390B Trinity KT-A
PnP/PCI Configurations
NO
Disabled
Auto(ESCD)
Press Enter
Press Enter
Disabled
Enabled
Enabled
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
53
Item Help
w w w w w
Menu Level
Select Yes if you are
using a Plug and Play
capable operating
system. Select No if
you need the BIOS to
configure non-Boot
devices
ESC:Exit F1:General Help
F7:Optimized Defaults