Bios Exit Menu - TYAN THUNDER K8S PRO Manual

Feature
APM Configuration
Restore on AC/Power
Loss
3.10 – BIOS Exit Menu
You can display an Exit BIOS Setup option by highlighting it Arrow ( / ) keys and
pressing Enter.
Main Advanced
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Charges
Load Optimal Defaults
Load Failsafe Defaults
Save Changes and Exit
Use this option to exit setup utility and re-boot.
All new selections you have made are stored into CMOS.
System will use the new settings to boot up.
Discard Changes and Exit
Use this option to exit setup utility and re-boot.
All new selections you have made are not stored into CMOS.
System will use the old settings to boot up.
Discard Changes
Use this option to restore all new setup values that you have made but not saved into
CMOS.
Load Optimal Defaults
Use this option to load default performance setup values.
Use this option when system CMOS values have been corrupted or modified incorrectly.
Load Failsafe Defaults
Use this option to load all default failsafe setup values.
Use this option when troubleshooting
Option
Power On
Power Off
Last State
BIOS Setup Utility
PCI/PnP Boot
http://www.TYAN.com
Description
Configures how the system board
responds to a power failure
Security Chipset
Use [ENTER], [TAB] or
[SHIFT_TAB] to select a
field
Use [+] or [-] to configure
system time.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1
F10 Save and Exit
ESC Exit
70
Power Exit
General Help