TYAN THUNDER K8S PRO Manual page 65

Feature
Memory Configuration
Bank Interleaving
Node Interleaving
Burst Length
3.08.1.2 –ECC Configuration Sub-Menu
This menu allows the user to configure ECC setup for system & DRAM. Use the up
and down arrow ( / ) keys to select an item. Use the Plus and Minus (+/-) keys to
change the value of the selected option.
Main Advanced
ECC Configuration
Master ECC Enable
DRAM ECC Enable
DRAM BG Scrub
DRAM SCRUB REDIRECT
ECC Chip Kill
L2 Cache BG Scrub
Data Cache BG Scrub
Feature
ECC Configuration
Master ECC
DRAM ECC
DRAM BG Scrub
Option
Disabled
Auto
Disabled
Auto
8beats
4beats
BIOS Setup Utility
PCI/PnP Boot
Option
Enabled
Disabled
Disabled
Enabled
Disabled
40ns
80ns
160ns
320ns
640ns
1.28us
2.56us
5.12us
http://www.TYAN.com
Description
Allows memory access to be spread
across memory banks.
Allows memory access to be spread
across memory nodes.
Burst length must be set to 8beats
for 128bit memory support.
Security Chipset
Use [ENTER], [TAB]
or [SHIFT_TAB] to
select a field
[Enabled]
[Enabled]
Use [+] or [-] to
[Disabled]
configure system time.
[Disabled]
[Disabled]
← → Select Screen
[Disabled]
[Disabled]
↑↓ Select Item
+/-
F1
F10 Save and Exit
ESC Exit
Description
Enables support on all nodes for
ECC error checking and correction.
Enables support on all banks for
ECC error checking and correction.
DRAM scrubbing corrects and
rewrites memory errors so later
reads are correct. Doing this while
memory is not being used improves
performance.
65
Power Exit
Change Option
General Help