Bios Exit Menu - TYAN Tiger K8W S2875 User Manual

Resume On PME#
Resume On RTC Alarm
Power Button Mode
Feature
APM Configuration
Restore on AC/Power
Loss
3.10 – BIOS Exit Menu
You can display an Exit BIOS Setup option by highlighting it Arrow (á/â) keys and
pressing Enter.
Main Advanced
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Charges
Load Optimal Defaults
Load Failsafe Defaults
Save Changes and Exit
Use this option to exit setup utility and re-boot.
All new selections you have made are stored into CMOS.
System will use the new settings to boot up.
Enabled
Disabled
Enabled
Disabled
Enabled
On / Off
Standby
Suspend
Option
Power On
Power Off
Last State
BIOS Setup Utility
PCI/PnP Boot
http://www.TYAN.com
An input signal from PME on the PCI
card awakens the system from a sof t
off state.
When set to Enabled RTC Alarm
resume, you could set the date (of
month) and timer (hh:mm:ss), any
event occurring at will awaken a
system which has been powered
down.
Specifies how the externally
mounted power button on the front of
the chassis is used.
Description
Configures how the system board
responds to a power failure
Security Chipset
Use [ENTER], [TAB] or
[SHIFT_TAB] to select a
field
Use [+] or [-] to configure
system time.
? ? Select Screen
? ? Select Item
Enter Go to Sub Screen
F1
F10 Save and Exit
ESC Exit
62
Power Exit
General Help