Hammer Configuration
Integrated Devices
PCI Configuration
IDE Configuration
Floppy Configuration
I/O Device Configuration
Hardware Monitor
Auto Fan control
FanPwmDuty
Console Redirection
Watchdog Timer Option
Intruder Support
3.4.1 – Hammer Configuration Sub-Menu
You can use this screen to select options for the Hammer Configuration settings. Use
the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to
change the value of the selected option.
Hammer Configuration Sub-Menu
Menu Item
Menu Item
Menu Item
Menu Item
Menu Item
Menu Item
Menu Item
Enabled
Disabled
30%
40%
50%
60%
Menu Item
Menu Item
Enabled
Disabled
PhoenixBIOS Setup Utility
45
http://www.TYAN.com
Set Hammer Configuration.
Set integrated devices.
Configure PCI devices.
Configure IDE interface.
Configure floppy interface.
Peripheral configuration
Enable/disable the onboard
Hardware monitor device
Choosing "Enabled" will do auto
fan control to reduce fan noise.
Select Auto fan control's PWM
duty to reduce fan speed
Additional setup menus to
configure console.
Watchdog Timer configuration
Enabled/disabled the chassis
intrude function
Item Specific Help