Watchdog Timer Option Sub-Menu - TYAN THUNDER K8QW Manual

↑↓: Select Item
F1: Help
← →: Select Screen Enter: Select
Esc: Exit
F10: Previous Values
Feature
Com Port Address
Baud Rate
Console Type
Flow Control
Console connection
Continue C.R. after POST
3.4.9 – Watchdog Timer Option Sub-Menu
You can use this screen to select options for the Watchdog settings. Use the up and
down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the
value of the selected option.

Watchdog Timer Option Sub-Menu

-/+: Change Values
Option
Disabled
On-board
COMA
On-board
COMB
300
1200
2400
9600
19.2K
38.4K
57.6K
115.2K
VT100
VT100,8bit
PCI-ANSI,7bit
PCI-ANSI
VT100+
VT-UTF8
CTS/RTS
XON/XOFF
None
Direct
Via modem
Off
On
PhoenixBIOS Setup Utility
59
http://www.TYAN.com
F9: Setup Defaults
Sub-Menu
Description
Select the Com Port address.
Enable the specified baud
rate.
Enable the specified console
type.
Enable flow control.
Indicate whether the console
is connected directly to the
system or a modem is used to
connect.
Enable Console Redirection
after OS has loaded.