Connecting External Devices; Installing The Power Supply - TYAN THUNDER K8QW Manual

2.34 – Connecting External Devices
Connecting external devices to the motherboard is an easy task. The standard
devices you should expect to plug into the motherboard are keyboards, mice, and
printer cables. The following diagram will detail the ATX port stack for the following
board:
2.35– Installing the Power Supply
There are three power connectors on your Thunder K8QW. Tyan recommends that
you have an EPS12V power supply that has one 24-pin and two 8-pin power
connectors.
The Thunder K8QW is standard EPS 12V compatible, please take following
combination for reference. Please be aware that ATX 2.x, ATX12V and ATXGES
power supplies are not compatible with the board and can damage the motherboard
and/or CPU(s).
PWR3: 2x2 pin ATX 12V power
Connector
PWR2: 8-pin EPS 12V power connector
PWR1: 8-pin EPS 12V power connecto
PWR4: 1x4 pin 5V power connector
PWR0: 24-pin EPS 12V power connector
39
http://www.TYAN.com
r