Table of Contents
Advertisement
HT-LDT Frequency
ECC
ECC Scrub Redirection
Dram ECC Scrub CTL
Chip-Kill
DDR Data Transfer Rate
Node Memory Inter Leave
Dram Bank Inter Leave
4GB Memory Hole Adjust
4GB Memory Hole Size
DDR Clock Jitter
Memory Hole Mapping
Enable All Memory Clocks
Controller Config Mode
Timing Config Mode
Swizzle Memory Banks
MTRR Mapping
↑↓: Select Item
F1: Help
← →: Select Screen Enter: Select
Esc: Exit
F10: Previous Values
Feature
HT-LDT Frequency
ECC
ECC Scrub Redirection
Dram ECC Scrub CTL
Chip-Kill
[800Mhz]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[200M]
[Disabled]
[Disabled]
[Auto]
[64M]
[Disabled]
[Hardware]
[Populated]
[Auto]
[Auto]
[Disabled]
[Continues]
-/+: Change Values
Sub-Menu
Option
800Mhz
1000Mhz
Enabled
Disabled
Disabled
Enabled
Disabled
1.31ms
2.62 ms
5.24 ms
10.49 ms
20.97 ms
42.0 ms
84.0 ms
Disabled
46
http://www.TYAN.com
F9: Setup Defaults
Description
Set HT-LDT link between
CK8
CK804
ECC check/correct mode.
This is a Global enable
function for all blocks within
CPU core and North Bridge.
Enable ECC Scrubber to
correct errors detected in
Dram during normal CPU
requests (Foreground
scrubbing).
Sets the rate of
BACKGROUND scrubbing for
Dram (In addition to normal
ECC scrubbing from system
requests).
NOTE: BACKGROUND agent
works independently of CPU
requests and bus masters, but
cannot be enabled without first
enabling Dram ECC.
Enable Chip Kill ECC on
Advertisement
Table of Contents
