Pci Configuration Sub-Menu - TYAN THUNDER K8QE Manual

3.4.3 - PCI Configuration Sub-Menu

You can use this screen to select options for the PCI Configuration settings. Use the
up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to
change the value of the selected option.
Advanced
PCI Device, Slot # 1
Onboard VGA
Default Primary Video Adapter
Option ROM Placement
PCI/PNP ISA UHB Region Exclusion
PCI/PNP ISA IRQ Resource Exclusion
F1: Help ¡ ü ¡ ý
Esc: Exit ¡ û ¡ ú : Select Screen Enter: Select
F10: Previous Values
Feature
PCI Device, Slot #1
Onboard VGA
Default Primary Video Adapter
Option ROM Placement
PhoenixBIOS Setup Utility
: Select Item -/+: Change Values
http://www.TYAN.com
[Enabled]
[Add On]
[Disabled]
F9: Setup Defaults
Sub-Menu
Option
Menu Item Select PCI slot configuration.
Enabled
Enable/Disable Onboard VGA.
Disabled
Select 'PCI' to have a PCI
Add On
video card, if installed, used
On Board
for the boot display device.
You chose to apply option
Disabled
ROM placement feature, while
E000
you knew it was risky. If the
Extension by
system hangs during boot,
PFA
48
Item Specific Help
Description