2.12 – ID LED (J119)
2.13 – NMI (J22)
PIN-1
The ID LED is used to help identify a
system
installed within a high density rack or
cabinet that is populated with several
other similar systems.
The first press of the ID Switch will
turn on the LED, and the second press
will turn off ID LED.
PIN-1
Allows you to issue a non-maskable
interrupt.
17
http://www.TYAN.com
Pin_1:Turn on/off
signal
PIN-2
Pin_2:GND
for
servicing
when
Pin_1:NMI Signal
PIN-2
Pin_2:3.3VSB
it
is