Pci Pnp Menu - TYAN Tempest i5100T Manual

3.8 PCI PnP Menu

You can use this screen to view PnP (Plug & Play) BIOS Configuration
Menu. This menu allows the user to configure how the BIOS assigns resources
& resolves conflicts. Use the up and down arrow ( / ) keys to select an item.
Use the Plus and Minus (+/-) keys to change the value of the selected option.
The settings are described on the following pages.
Main Advanced
Advanced PCI/PnP Settings
WARING: Setting wrong values in below sections may
cause system to malfunction.
Clear NVRAM
Plug & Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
Feature
Advanced PCI/PnP Settings
Clear NVRAM
Plug & Play OS
PCI Latency Timer
BIOS Setup Utility
PCI/PnP Boot
[No]
[No]
[64]
[Yes]
[Disabled]
[Enabled]
Option
No
Yes
Yes
No
32
64
96
128
160
192
224
248
51
Security Chipset
Clear NVRAM during
System Boot.
← → Select Screen
↑↓ Select Item
+/- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Description
Clears NVRAM during system
Boot.
No: lets the BIOS configure all the
devices in the system.
Yes: lets the operating system
configure Plug and Play (PnP)
devices not required for boot if
your system has a Plug and Play
operating system.
This setting controls how many
PCI clocks each PCI device can
hold the bus before another PCI
device takes over. When set to
higher values, every PCI device
can conduct transactions for a
longer time and thus improve the
effective PCI bandwidth.
Values in units of PCI clocks for
PCI device latency timer register.
Exit