Hardware Monitor Sub-Menu - TYAN THUNDER K8QE Manual

Serial port B:
Mode:
Parallel port:
Base I/O address:
Mode:
Floppy disk controller:
Base I/O address
F1: Help ¡ ü ¡ ý : Select Item
Esc: Exit ¡ û ¡ ú : Select Screen Enter: Select
F10: Previous Values
Feature
Serial port A
Serial port B
Mode
Parallel port
Mode
Floppy disk controller
Base I/O address

3.4.7- Hardware Monitor Sub-Menu

You can use this screen to hardware monitor infomation. Use the up and down
<Arrow> keys to select an item. Use the <Plus> and <Minus> keys to change the value of
the selected option.
Advanced
[Auto]
[Normal]
[Auto]
[378]
[ECP]
[Enabled]
[Primary]
-/+: Change Values
Option
Auto
Disabled
Auto
Disabled
Normal
IR
ASK-IR
Auto
Disabled
ECP
EPP
Enabled
Disabled
Auto
Primary
Secondary
PhoenixBIOS Setup Utility
55
http://www.TYAN.com
F9: Setup Defaults
Sub-Menu
Description
Configure serial port A using
options.
Configure serial port B using
options.
Set the mode for Serial port B
using options.
Configure parallel port using
options.
Set the mode for parallel port
using options.
Configure Floppy disk
controller using options.
Set the base I/O address for
parallel port.