Usb Header; Jfan Headers - TYAN THUNDER K7 User Manual

2.6-I. USB Header* (J36)
This header allows for a USB connection*. The USB channel on this header is on a separate channel
from the rear USB connections channel.
2.6-J. FAN Headers (P1FAN, P0FAN, FAN1, FAN2, FAN3, J54, J56, J58)
These headers allow for extra fans to be installed. P1FAN and P0FAN are reserved for Processor 1 and
Processor 0 (respectively). All other fans are left to the user's discretion.
ground
The FAN connector has a 12V, 1.2A limitation. Tyan takes no responsibility
NOTE:
and will not be held liable for damage related to the misuse of any FAN jumper.
* Only certain chassis allow for frontside USB connection. Please check with your chassis vendor for
details on frontside USB connections.
16
FAN
1 2 3
+12V speed
USB Header (J36)
+VCC 1 2 ground
signal out 3 4 ground
signal in 5 6 signal in
ground 7 8 signal out
ground 9 10 +VCC
FAN2
FAN3
P1FAN
P0FAN
J56
J54
FAN1
J58
Specifications
Voltage 12V
Amperage 1.2A
http://www.tyan.com