Master And Slave Screens - TYAN THUNDER K7 User Manual

3.1-A. Master and Slave screens
The following options are for setting the configuration of the IDE devices installed in the system.
Type
Cylinders
Heads
Sectors/Track
Landing Zone
Write Precomp
36
FORMAT: [option]
OPTIONS: None
1 to 39
User
Auto
IDE Removeable
CD-ROM
ATAPI Removeable Removeable ATAPI media
NOTES: All options are dependent on the drive.
FORMAT: [#]
OPTIONS: 1 to 65,536
NOTES: All options are dependent on the drive.
FORMAT: [#]
OPTIONS: 1 to 16
NOTES: All options are dependent on the drive.
FORMAT: [#]
OPTIONS: 1 to 63
NOTES: All options are dependent on the drive.
FORMAT: [#]
OPTIONS: 1 to 2048
NOTES: IDE devices do not require a Landing Zone.
FORMAT: [#] or [None]
OPTIONS: 1 to 2048
None
NOTES: IDE devices do not require a Write Precomp.
Auto-typing is not able to
supply the drive type, or
the user has selected
None to disable any
drives that might be
installed.
Pre-configured drive
parameters. This option is
dependent on your drive.
The user must define the
different parameters of
the drive.
Auto-detect the drive
parameters.
Removeable read-and-
write media (e.g. Zip
drive).
Readable CD-ROM drive.
(e.g. USB Zip drive).
Number of cylinders.
Number of read/write
heads.
Number of sectors per
track.
Number of the cylinders
specified as the landing
zone for the read/write
heads.
Number of the cylinder at
which to change the write
timing.
http://www.tyan.com