Wake-On-Lan (J10); Wake-On-Ring (J12); Usb Header (J16) - TYAN TOMCAT I845GL Manual

2.6 – Wake-On-LAN (J10)
Plugging your LAN card cable into J10 enables the Wake-On-LAN feature. This
automatically resumes the system power when the LAN port receives an
incoming signal during power-saving mode.
2.7 – Wake-On-Ring (J12)
Similarly to the Wake-On-LAN, plugging your modem into J12 enables the
Wake-On-Ring feature. This automatically resumes the system power when the
modem receives an incoming signal during power-saving mode.
2.8 – USB Header (J16)
Pins grouped together:
1,2: VCC
3,4: USB +
5,6: USB –
7,8,9,10: GND
Pin 2 Pin 4
VCC USB +
Pin 1 Pin 3
VCC USB +
Pin 6 Pin 8 Pin 10
USB – GND
Pin 5 Pin 7
USB – GND
http://www.TYAN.com
GND
Pin 9
GND
10