TYAN THUNDER K7 User Manual page 53

SCSISelect Options
Host Adapter BIOS [Auto-sync]
b
Domain Validation [Auto-sync]
Support Removable Disks Under BIOS as Fixed
b
Disks
BIOS Support for Bootable CD-ROM
BIOS Support for Int 13 Extensions
a.Setting is valid only if Multiple LUN Support is enabled.
b.Settings are valid only if host adapter BIOS is enabled.
Follow these steps to start SCSISelect:
Turn on or restart your system.
During the startup process, pay careful attention to the messages that appear on your screen.
When the following message appears on your screen, press the [Ctrl]+[A] keys simultaneously (this mes-
sage appears for only a few seconds):
Press <Ctrl><A> for SCSISelect (TM) Utility!
Select SCSI Channel A or B. Most SCSISelect options can be set separately for each SCSI channel.
From the menu that appears, use the arrow keys to move the cursor to the option you want to select, then
press [Enter].
Note: If you have difficulty viewing the display, press F5 to toggle between color and mono-
chrome modes. (This feature may not work on some monitors.)
Exiting SCSISelect
Follow these steps to exit SCSISelect:
Press Esc until a message prompts you to exit (if you changed any settings, you are prompted to save
the changes before you exit).
At the prompt, select Yes to exit, then press any key to reboot the computer. Any changes you made in
SCSISelect take effect after the computer boots.
Thunder K7 S2462
Available Settings
Enabled
Disabled: Scan Bus Dis-
abled: Not Scan
Enabled, Disabled
Disabled,
Boot Only,
All Disks
b
Enabled, Disabled
b
Enabled, Disabled
Default Setting
Enabled
Enabled
Disabled
Enabled
Enabled
53