Advanced Setup - TYAN THUNDER K7 User Manual

3.2 Advanced Setup

Options such as I/O device interfaces can be altered through this screen.
Reset Configuration Data
USB Host Controller
USB BIOS Legacy Support
Chipset Configuration
Keyboard Configuration
I/O Device Configuration
Onboard PCI IDE
Serial Port A (..B)
38
FORMAT: [option]
OPTIONS: Yes
No
NOTES: Select Yes when required to restore the manu-
facturer's defaults.
FORMAT: [option]
OPTIONS: Disabled / Enabled Enables or disables the
FORMAT: [option]
OPTIONS: Disabled
Discussed on p. 40
Discussed on p. 41
Discussed on p. 41
FORMAT: [option]
OPTIONS: Both
Disabled
Primary
Secondary
FORMAT: [option]
OPTIONS: Disabled
Enabled
Auto
Erases all configuration
data in a section of mem-
ory for ESCD (Extended
System Configuration
Data) which stores the
configuration settings for
non-PnP plug-in devices.
Does not erase ESCD.
USB onboard controller.
Enables or disables sup-
port for Legacy USB.
'Both' enables both IDE
ports.
Disables the ports.
Enables the primary port
only.
Enables the secondary
port only.
'Disabled' turns off the
port.
'Enabled' requires you to
enter the base I/O
address and the INT num-
ber on the next line.
'Auto' makes the BIOS
configure the port during
POST.
http://www.tyan.com