Adjusting the headlamp beam pattern
Location of headlamp masks on Bi-Xenon headlamps - 1 and 2 = LHD variant, 3 and 4 = RHD variant
Headlamp masking
Copy the templates and transfer the pattern to a
self-adhesive, waterproof material such as
opaque tape or the like.
The mask is positioned using the dot (5) in the
headlamp lens as a reference point. The
reference measurement (X) indicates the
distance from the dot (5) to the corner of the
mask marked with an arrow.
After copying the templates located on the next
page, check the measurements so that the
reference measurements cover enough of the
beam pattern.
118
Bi-Xenon headlamps, LHD
variant
Copy templates 1 and 2. Check the
measurements to ensure they are correct.
Transfer the template to a self-adhesive,
waterproof material and cut it out.
Reference measurement:
Template 1.) (3) = 56 mm, (4) = 43 mm
Distance to dot in headlamp lens: 5 = 29 mm.
Template 2.) (6) = 56 mm, (7) = 42 mm
Distance to dot in headlamp lens: (8) = 6 mm.
Bi-Xenon headlamps, RHD
variant
Copy templates 3 and 4. Check the
measurements to ensure they are correct.
Transfer the template to a self-adhesive,
waterproof material and cut it out.
Reference measurement:
Template 3.) (1) = 56 mm, (2) = 42 mm
Distance to dot in headlamp lens: (5) = 29 mm.
Template 4.) (6) = 56 mm, (7) = 41 mm
Distance to dot in headlamp lens: (8) = 0 mm.