Local Codes; Unpacking; Product Features - Desa Comfort Glow CGF265NVA Owner's Operation And Installation Manual

LOCAL CODES

UNPACKING

PRODUCT
FEATURES
102664
Install and use fireplace with care. Follow all local codes. In the absence of local
codes, use the latest edition of The National Fuel Gas Code ANSI Z223, also
known as NFPA 54*.
*Available from:
American National Standards Institute, Inc.
National Fire Protection Association, Inc.
1. Place the carton containing the fireplace unit on its back. Hold fireplace and
pull the carton and pallet away. Remove trim kit from front of fireplace.
2. Locate two screws above top corners of the fireplace screen. Remove and
discard these screws. Lift fireplace screen up and pull out to remove.
3. Remove protective packaging applied to logs, log base assembly, and fireplace.
4. Check all items for any shipping damage. If damaged, promptly inform dealer
where you bought fireplace.
Operation
This vent-free fireplace is clean burning. It requires no outside venting. There is no
heat loss out a vent or up a chimney. Heat is generated by both realistic flames and
glowing embers. The fireplace requires no electricity making it ideal for emergency
back-up heat.
Safety Features
This fireplace has a pilot with an Oxygen Depletion Sensor Shutoff System
(ODS). The ODS/pilot is a required feature for vent-free room heaters. The ODS
system protects against oxygen depletion and any interruption in the fuel supply. If
either occurs, the ODS shuts off gas flow to the burner, turning the fireplace off.
An internal regulator controls fluctuations in your gas pressure.
Piezo Ignition System
This fireplace has a piezo ignitor. This system requires no matches, batteries, or
other sources to light fireplace.
Thermostat Control (CGF280NT)
These fireplaces have a thermostat sensing bulb and a control valve. The thermo-
stat controls the heat output and flame height. This maintains a consistent room
temperature. Even the lowest setting provides realistic flames and glowing embers
from two burners. Selecting higher comfort settings allows the fireplace to run
longer, producing greater heat output. At lower comfort settings, the fireplace will
run less. This results in increased heating comfort. This can also result in lower
gas bills.
Variable Manual Control (CGF265NVA)
These fireplaces have a variable manual control valve which allows the user to
choose the heat setting that best suits his needs. Any setting between low and high
may be selected by simply turning the control knob.
1430 Broadway
New York, NY 10018
Batterymarch Park
Quincy, MA 02269
5