Patching; Input Channel Patching - Yamaha CS1D Owner's Manual

CS1D Operating Manual (Basic Operation)

Patching

Simply connecting an external device to an input/output unit does not cause the signal to be input to (or output from)
the engine. In order to transfer signals to and from the engine, you must assign (patch) each connector of the input/out-
put unit to a channel of the PM1D system.
Hint
As exceptions, patching is not necessary for the output jacks of the CS1D console itself (the STEREO OUT DIGITAL
AES/EBU, STEREO OUT DIGITAL COAXIAL, MONITOR OUT ANALOG, and CUE OUT ANALOG jacks).

Input channel patching

Here's how to patch an input unit to an input channel, and assign a name.
[Procedure]
1. In the LCD FUNCTION ACCESS block, press the
INPUT [PATCH] switch several times to access the
following screen.
LCD FUNCTION ACCESS
block
INPUT [PATCH] switch
This is the INPUT PATCH screen, in
which you can patch the various
input jacks and the return signals
from the internal effects to the
desired input channel (monaural/
stereo).
28